¡¡¡¡Insulating
glass are normally made up of 2(in some special
cases 3) sheets of glass,and the units are sealed
by two process of sealing with high strength and
high airtight compound sealing materials.The air
inside the gap is dried efficiently by the desiccant
inside the aluminum frame .
Energy
Saveing: ¡¡¡¡The coefficient
of overall heat transmission(U value) of 6mm single
sheet is 5.75Kcal/mh¡ãC.The U value of ordinary
Insulating glass is 1.4-2.9Kcal/mh¡ãC
The U value of Insulating glass which is charged
of Ar or SF6 can be reduced to the minimum of 1.19
Kcal/mh¡ãC¡¡The U value of Insulating glass which
is used Low£E glass as second or third page can
be reduced to about 0.8 Kcal/mh¡ãCThe Ar mainly
used for reduced the U value and the SF6 mainly
used for sound control to reduce noise db value.The
two type of gas can be used separate and also can
be used at the same time with certain ratio.
¡¡Sound
insulation£º
¡¡¡¡Ordinary Insulating glass units can reduce noise
with 30db.The Insulating glass units with gas filling
can reduce 5db more than ordinary Insulating glass
units.So the Insulating glass units with gas filling
can reduce sound from 80 db to a comfortable level
of 45 db.
Applications:
¡¡¡¡Tower
blocks for offices,Hotel,Hospital and libraries.Engine
room,broadcasting room,recording studio,computer
room,windows of automotion and train,control tower
of airport.Place where temperature control and dew
condensation prevention is recommended.